Flat Top Base Flight 1505 series for Plastic Modular Belt

Short Description:

Modular belts are constructed with modules molded from thermoplastic materials connected with solid plastic rods. Except for narrow belts (one complete module or less in width),all are built with the joints betweenmodules staggered with those of adjacent rows in a “bricklayed” fashion. This structure can enhancetransverse strength and it is easy for maintain.

Send email to us

Product Detail

Product Tags

Benefits

Plastic conveyor chain Multiflex Chains series Turning chain board (13)

Modular belts are constructed with modules molded from thermoplastic materials connected with solid plastic rods. Except for narrow belts (one complete module or less in width),all are built with the joints betweenmodules staggered with those of adjacent rows in a "bricklayed" fashion. This structure can enhancetransverse strength and it is easy for maintain.

The total plastic and cleanable design can solve the steel belts easily polluted. Now the cleanable design makes the belts very suitable for food industry area as well. Also there are be widely used in many otherindustries,such as container making,pharmaceutical and automotive,lines of battery and so on.

Product parameters

Flat Top 1505

Belt pitch: 15.0mm

Open area: 0%

Assembling method: connected with rods

Belt type	Material	Temperature range		Working load(max.)	Weight	Backflex radius(min.)
Belt type	Material	Dry (℃)	Wet (℃)	N/m (21℃)	kg/m²	mm
FT1505	POM	4 to 80	4 to 65	13200	6.35	25
FT1505	PP	5 to 105	5 to 105	7300	4.49	25

Flat Top 1505 With Positrack

Belt pitch: 15.0mm

Open area: 0%

Assembling method: connected with rods

Belt type	Material	Temperature range		Working load(max.)	Weight	Backflex radius(min.)
Belt type	Material	Dry (℃)	Wet (℃)	N/m (21℃)	kg/m²	mm
FTDP1505	POM	4 to 80	4 to 65	13200	6.35	25
FTDP1505	PP	5 to 105	5 to 105	7300	4.49	25

Classic Sprockets – Series 1505

For plastic belt: 1505-Series.

Sprocket type	Number of teeth	Pitch diameter	Outside diameter	Hub width	Bore
Sprocket type	Number of teeth	H (mm)	C (mm)	A(mm)	DF (mm)
1-1505-12-30R	12	58.1	58.2	24.1	Φ30
1-1505-16-30R	16	77.1	77.7	31.8	Φ30
1-1505-24-30R	24	114.9	115.5	40	Φ30
1-1505-24-40R					Φ40
1-1505-24-25Q					□25
1-1505-32-30R	32	153.4	154.8	40	Φ30
1-1505-32-40R					Φ40
1-1505-32-40Q					□40

Applications

S2400 Radius Flush Grid Modular Conveyor Belt (11)

TuoXin company has a widely range of different material and structure belts. The range of TuoXin' smodular belts varies from 3/8 inch small pitch straight running belts to 2 inch pitch sideflexing belts, The mostcommonly used belt styles inclued:

Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.Flush Grid:commonly used in applications where drainage or airflow is desired.Raised Rib:recommended in applications where product stability over transfers is a concern.Friction Top:commonly employed on incline conveyors,where the elevation of product changes. Friction

Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.

Roller Top:used in a variety of low-pressure accumulation applications.Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.

Other,less frequently used belt styles may better fit your special requirements: Open Grid, Nub Top（anti-stick) , Cone Top (extra grip) .

Large production base, covering an area of 20000 square meters, standardized production and operation mode, timely delivery, low price and good quality