Plastic modular belts require proper maintenance and care in daily use to ensure their normal operation and extend their service life. Here are some key steps and considerations for daily maintenance and care of plastic mesh belts:
Regular inspection and cleaning: After each use, the plastic mesh belt should be thoroughly cleaned to remove attached materials, dust, and other impurities. This helps prevent wear and blockage caused by material residue on the mesh belt. Also, check the mesh belt for damage, deformation, or excessive wear, as well as the functioning of the drive mechanism.
Lubrication maintenance: Apply a proper amount of lubricating oil or grease to the plastic mesh belt regularly to reduce wear and noise and ensure smooth operation of the mesh belt.
Storage environment: The plastic mesh belt should be stored in a dry, ventilated, cool, and non-corrosive gas environment to prevent corrosion and deformation. Avoid direct sunlight exposure to prevent aging.
Operation precautions: When using plastic mesh belts, avoid running grease, chemicals, glass and other fragile or irritating items on the belt to avoid affecting its normal service life. Also, during the process of conveying materials on the mesh belt, the materials should be evenly distributed to avoid accumulation and jamming during transportation.
Maintenance tools and equipment: Ensure that maintenance tools and equipment are complete and regularly maintained and cleaned. When cleaning packaging tools or electric packaging machines, power should be disconnected or batteries removed before operation. After using these tools for a period of time, regular maintenance should be performed to check the status of their components and electronic equipment.
Fault handling: In the event of abnormal operation of the plastic mesh belt, or abnormal noise, vibration, etc., it is necessary to immediately stop the machine for inspection and troubleshooting according to the operating instructions or technical requirements, to avoid taking wrong measures that may cause greater losses.
By following these maintenance and care steps, it is possible to ensure the normal operation of plastic mesh belts, extend their service life, and improve production efficiency. At the same time, it is also helpful to reduce production disruptions and losses caused by equipment malfunction.
Post time: Apr-16-2024